[Précédent (date)] [Suivant (date)] [Précédent (sujet)] [Suivant (sujet)] [Index par date] [Index par sujet]
[lq:aide] Est-ce que mon moniteur risque d'exploser?
- To:
- Subject: [lq:aide] Est-ce que mon moniteur risque d'exploser?
- From: Sophie Trahan <>
- Date: Sat, 29 Oct 2005 18:10:38 -0400
Il y a trois ans, j'avais essayé d'installer Linux sur mon
ordi: résultat, mon moniteur a sauté, deux fois plutôt
qu'une parce que je l'avais mal configuré.
Cette fois, je m'essaie avec un Dell 1905FP et je tiens
vraiment à ne pas lui faire subir le même sort. J'ai
installé le driver ATI sous SUSE 10_64 afin de pouvoir
profiter de l'accélération 3D, mais ma configuration a été
changée et rien ne me semble plus pareil au niveau de
l'affichage, d'où mon inquiétude. Pouvez-vous me dire ce qui
manque à mon xorg.conf?
# File: xorg.conf
# File generated by fglrxconfig (C) ATI Technologies, a
substitute for xf86config.
# Note by ATI: the below copyright notice is there for
servicing possibly
# pending third party rights on the file format and the
instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any
person obtaining a
# copy of this software and associated documentation files
(the "Software"),
# to deal in the Software without restriction, including
without limitation
# the rights to use, copy, modify, merge, publish,
distribute, sublicense,
# and/or sell copies of the Software, and to permit persons
to whom the
# Software is furnished to do so, subject to the following
conditions:
#
# The above copyright notice and this permission notice
shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN
NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the
XFree86 Project shall
# not be used in advertising or otherwise to promote the
sale, use or other
# dealings in this Software without prior written
authorization from the
# XFree86 Project.
#
#
**********************************************************************
# Refer to the XF86Config(4/5) man page for details about
the format of
# this file.
#
**********************************************************************
#
**********************************************************************
# DRI Section
#
**********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
EndSection
#
**********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
#
**********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that
module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the
DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a
EndSection
#
**********************************************************************
# Files section. This allows default font and rgb paths to
be set
#
**********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name
of the
# file minus the extension (like ".txt" or ".db"). There is
normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are
concatenated together),
# as well as specifying multiple comma-separated entries in
one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs,
Mosaic or other
# programs take long to start up, try moving the Type1 and
Speedo directory
# to the end of this list (or comment them out).
#
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
# FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath
"/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
FontPath
"/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
FontPath
"/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1"
FontPath
"/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
FontPath
"/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/kwintv"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/CID"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
FontPath
"/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
FontPath
"/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
FontPath
"/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
FontPath
"/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
FontPath
"/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
#
**********************************************************************
# Server flags section.
#
**********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a
signal is
# received. This may leave the console in an unusable
state, but may
# provide a better stack trace in the core dump to aid in
debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort
sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_->
mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client.
With
# it the client can still run and fetch card and monitor
attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune
client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input
device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
#
**********************************************************************
# Input devices
#
**********************************************************************
#
**********************************************************************
# Core keyboard's InputDevice section
#
**********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to
"Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg,
with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard,
modify the
# lines below (which are the defaults). For example, for a
non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "ca"
EndSection
#
**********************************************************************
# Core Pointer's InputDevice section
#
**********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and
uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is
50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
#
**********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example
only. Refer
# to the XF86Config man page for a description of the options.
#
**********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
**********************************************************************
# Monitor section
#
**********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Monitor0"
# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484
509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604
636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768
769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865
868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865
868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864
865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961
964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960
961 964 1017 +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024
1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq:
60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024
1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001
1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001
1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001
1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001
1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027
1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025
1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027
1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027
1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081
1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081
1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201
1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201
1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537
1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537
1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052
1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible
display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400
2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible
display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400
2402 2404 2434 +hsync +vsync
EndSection
#
**********************************************************************
# Graphics device section
#
**********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be
used to override
# the driver's chipset detection, and should not normally be
specified.
# Chipset "generic"
# The Driver line must be present. When using run-time
loadable driver
# modules, this line instructs the server to load the
specified driver
# module. Even when not using loadable driver modules, this
line
# indicates which driver should interpret the information in
this section.
Driver "vga"
# The BusID line is used to specify which of possibly
multiple devices
# this section is intended for. When this line isn't
present, a device
# section can only match up with the primary video device.
For PCI
# devices a line like the following could be used. This
line should not
# normally be included unless there is more than one video
device
# installed.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# === ATI device section ===
Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI
mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup" "Single"
Option "ScreenOverlap" "0"
Option "GammaCorrectionI" "0x06419064"
Option "GammaCorrectionII" "0x06419064"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
Option "CapabilitiesEx" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
BusID "PCI:1:0:0" # vendor=1002, device=5d4d
Screen 0
EndSection
#
**********************************************************************
# Screen sections
#
**********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific
screen section
# may be specified from the X server command line with the
"-screen"
# option.
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0 # initial origin if mode is smaller
than desktop
# Virtual 1280 1024
EndSubsection
EndSection
#
**********************************************************************
# ServerLayout sections.
#
**********************************************************************
# Any number of ServerLayout sections may be present. Each
describes
# the way multiple screens are organised. A specific
ServerLayout
# section may be specified from the X server command line
with the
# "-layout" option. In the absence of this, the first
section is used.
# When now ServerLayout section is present, the first Screen
section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Server Layout"
# Each Screen line specifies a Screen section name, and
optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom,
left and right
# of the primary screen.
Screen "Screen0"
# Each InputDevice line specifies an InputDevice section
name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
### EOF ###
Je joins, à tout hasard, ma configuration initiale:
# /.../
# SaX generated X11 config file
# Created on: 2005-10-28T19:19:05-0400.
#
# Version: 7.1
# Contact: Marcus Schaefer <sax@xxxxxxx>, 2002
#
# Automatically generated by [ISaX] (7.1)
# PLEASE DO NOT EDIT THIS FILE!
#
Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/local"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/kwintv"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/CID"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail"
EndSection
Section "Module"
Load "glx"
Load "type1"
Load "extmod"
Load "dbe"
Load "freetype"
Load "v4l"
EndSection
Section "InputDevice"
Driver "kbd"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "ca"
Option "XkbModel" "dell101"
Option "XkbRules" "xfree86"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Buttons" "10"
Option "Device" "/dev/input/mice"
Option "Name" "Logitech USB-PS/2 Optical Mouse"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
DisplaySize 380 310
HorizSync 30-81
Identifier "Monitor[0]"
ModelName "DELL 1905FP"
Option "DPMS"
VendorName "DEL"
VertRefresh 43-76
UseModes "Modes[0]"
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "1280x1024" 136.57 1280 1368 1504 1728 1024 1025
1028 1068
Modeline "1280x1024" 117.45 1280 1368 1504 1728 1024 1025
1028 1062
Modeline "1280x960" 128.13 1280 1368 1504 1728 960 961
964 1002
Modeline "1280x960" 109.13 1280 1360 1496 1712 960 961
964 996
Modeline "1280x800" 105.78 1280 1360 1496 1712 800 801
804 835
Modeline "1280x800" 90.09 1280 1352 1488 1696 800 801 804 830
Modeline "1152x864" 103.59 1152 1224 1352 1552 864 865
868 902
Modeline "1152x864" 88.18 1152 1224 1344 1536 864 865 868 897
Modeline "1280x768" 101.60 1280 1360 1496 1712 768 769
772 802
Modeline "1280x768" 85.69 1280 1344 1480 1680 768 769 772 797
Modeline "1024x768" 80.71 1024 1080 1192 1360 768 769 772 802
Modeline "1024x768" 68.55 1024 1080 1184 1344 768 769 772 797
Modeline "800x600" 48.18 800 840 920 1040 600 601 604 626
Modeline "800x600" 40.83 800 832 912 1024 600 601 604 623
Modeline "768x576" 44.83 768 808 888 1008 576 577 580 601
Modeline "768x576" 37.97 768 800 880 992 576 577 580 598
Modeline "640x480" 30.25 640 664 728 816 480 481 484 501
Modeline "640x480" 25.55 640 656 720 800 480 481 484 499
EndSection
Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "1280x1024" "1280x960" "1280x800" "1152x864"
"1280x768" "1024x768" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1280x960" "1280x800" "1152x864"
"1280x768" "1024x768" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1280x800" "1152x864"
"1280x768" "1024x768" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1280x1024" "1280x960" "1280x800" "1152x864"
"1280x768" "1024x768" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1280x960" "1280x800" "1152x864"
"1280x768" "1024x768" "800x600" "768x576" "640x480"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection
Section "Device"
BoardName "Radeon X850 XT PE (R480) (PCIE)"
BusID "1:0:0"
Driver "radeon"
Identifier "Device[0]"
Screen 0
VendorName "ATI"
EndSection
Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection
Section "Extensions"
EndSection
Je veux vraiment apprendre à travailler sous Linux, mais les
obstacles me semblent nombreux... Merci de votre aide!
Sophie Trahan