[Précédent (date)] [Suivant (date)] [Précédent (sujet)] [Suivant (sujet)] [Index par date] [Index par sujet]

Re: Carte de son



Bonjour et merci pour l'aide,

J'ai réussi avec sndconfig à faire sortir du son de la carte de son. Le problème est que c'est très saccadé. Dans certain groupes on propose des patch pour le driver cs4232 qui ne sont que quelques lignes de codes. Comment peut ont appliquer ces patch? Est-ce que vous pensez que ça va régler le poblème?

Merci encore.

Pierre



Étienne Savard wrote:

Bonjour Pierre,

J'ai fait des recherches sur Google avec les informations que tu as données.
Premièrement, EduLinux est basée sur Mandrake, alors j'ai orienté mes
recherches sur Mandrake et la carte de son Crystal Audio CS4236.

J'ai trouvé sur http://mandrakeusers.org/lofiversion/index.php/t13957.html
que quelqu'un avait le même problème que toi et qu'il a exécuté "sndconfig"
dans une fenêtre terminal pour régler son problème.

Si ça ne fonctionne pas, ce forum apporte également quelques pistes de
solution: http://www.linuxforum.com/forums/index.php?showtopic=85125

En espérant que ça t'aide!

Bonne chance!

Étienne.

<[email protected]> wrote in message
[email protected]">news:[email protected]...
J'ai pensé que l'output de dmesg pourrait vous aider à me répondre.
Le dernière ligne apparaît je crois parce que j'ai fait avant
insmod snd-cs4236


Merci encore


Pierre




Linux version 2.4.26-1mdk ([email protected]) (gcc version 3.3.2 (Mandrake Linux 10.0 3.3.2-6mdk)) #1 Tue Apr 20 14:41:00 CEST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e7400 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable) BIOS-e820: 0000000007ff0000 - 0000000007fffc00 (ACPI data) BIOS-e820: 0000000007fffc00 - 0000000008000000 (ACPI NVS) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) 127MB LOWMEM available. On node 0 totalpages: 32752 zone(0): 4096 pages. zone(1): 28656 pages. zone(2): 0 pages. ACPI disabled because your bios is from 2000 and too old You can enable it with acpi=force Building zonelist for node : 0 Kernel command line: BOOT_IMAGE=linux ro root=301 devfs=mount acpi=ht resume=/dev/hda5 splash=silent bootsplash: silent mode. Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Detected 564.121 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 1123.94 BogoMIPS Memory: 125580k/131008k available (1611k kernel code, 5040k reserved, 1244k data, 144k init, 0k highmem, 0k BadRAM) Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) Inode cache hash table entries: 8192 (order: 4, 65536 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU: Intel Celeron (Coppermine) stepping 03 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 564.1262 MHz. ..... host bus clock speed is 66.3676 MHz. cpu: 0, clocks: 663676, slice: 331838 CPU0<T0:663664,T1:331824,D:2,S:331838,C:663676> mtrr: v1.41 (20040107) Richard Gooch ([email protected]) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20040326 ACPI: Interpreter disabled. PCI: PCI BIOS revision 2.10 entry at 0xfd97e, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: ACPI tables contain no PCI IRQ routing entries PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router PIIX/ICH [8086/7110] at 00:07.0 Limiting direct PCI/PCI transfers. isapnp: Scanning for PnP cards... isapnp: Card 'CS4235 CODEC' isapnp: 1 Plug & Play card detected total Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) Software Suspend Gzip Compression Driver v1.0 Software Suspend LZF Compression Driver v1.0 Software Suspend Swap Writer v1.0 Starting kswapd kinoded started VFS: Disk quotas vdquot_6.5.1 devfs: v1.12c (20020818) Richard Gooch ([email protected]) devfs: boot_options: 0x1 vesafb: framebuffer at 0xf5000000, mapped to 0xc8800000, size 1875k vesafb: mode is 800x600x16, linelength=1600, pages=3 vesafb: protected mode interface info at c000:47e0 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Looking for splash picture.... silenjpeg size 24139 bytes, found (800x600, 24091 bytes, v3). Got silent jpeg. Got silent jpeg. Console: switching to colour frame buffer device 92x32 fb0: VESA VGA frame buffer device pty: 1024 Unix98 ptys configured Serial driver version 5.1-alpha (2004-01-01) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1040-0x1047, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1048-0x104f, BIOS settings: hdc:DMA, hdd:pio hda: FUJITSU MPE3084AE, ATA DISK drive blk: queue c0448b60, I/O limit 4095Mb (mask 0xffffffff) hdc: ATAPI 44X CDROM, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: 16514064 sectors (8455 MB) w/512KiB Cache, CHS=1027/255/63, UDMA(33) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 > ide: late registration of driver. md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 16384) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. SoftwareSuspend2: Swapwriter: Image location doesn't begin with 'swap:'<1>Swsusp 2.0-rc4: Missing or invalid storage location (resume2= parameter). Please correct and rerun lilo (or equivalent) before suspending. Swsusp 2.0-rc4: kswsuspd starting RAMDISK: Compressed image found at block 0 Freeing initrd memory: 138k freed VFS: Mounted root (ext2 filesystem). Mounted devfs on /dev Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Mounted devfs on /dev Freeing unused kernel memory: 144k freed Got silent jpeg. Real Time Clock Driver v1.10f usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 15:03:24 Apr 20 2004 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 9 for device 00:07.2 PCI: Sharing IRQ 9 with 00:06.0 usb-uhci.c: USB UHCI at I/O 0x1020, IRQ 9 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usbdevfs: remount parameter error EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal Adding Swap: 506008k swap-space (priority -1) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal EXT3-fs: mounted filesystem with ordered data mode. eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others PCI: Found IRQ 9 for device 00:06.0 PCI: Sharing IRQ 9 with 00:07.2 eth0: Intel Corp. 82557/8/9 [Ethernet Pro 100], 00:D0:B7:87:81:5B, IRQ 9. Receiver lock-up bug exists -- enabling work-around. Board assembly 690821-000, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x24c9f043). Receiver lock-up workaround activated. inserting floppy driver for 2.4.26-1mdk Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 hdc: attached ide-cdrom driver. hdc: ATAPI 40X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Installing knfsd (copyright (C) 1996 [email protected]). parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP] lp0: using parport0 (polling). Looking for splash picture.... found (800x600, 5062 bytes, v3). Splash status on console 0 changed to on SCSI subsystem driver Revision: 1.00 specify port CS4236+ soundcard not found or device busy Linux version 2.4.26-1mdk ([email protected]) (gcc version 3.3.2 (Mandrake Linux 10.0 3.3.2-6mdk)) #1 Tue Apr 20 14:41:00 CEST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e7400 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable) BIOS-e820: 0000000007ff0000 - 0000000007fffc00 (ACPI data) BIOS-e820: 0000000007fffc00 - 0000000008000000 (ACPI NVS) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) 127MB LOWMEM available. On node 0 totalpages: 32752 zone(0): 4096 pages. zone(1): 28656 pages. zone(2): 0 pages. ACPI disabled because your bios is from 2000 and too old You can enable it with acpi=force Building zonelist for node : 0 Kernel command line: BOOT_IMAGE=linux ro root=301 devfs=mount acpi=ht resume=/dev/hda5 splash=silent bootsplash: silent mode. Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Detected 564.121 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 1123.94 BogoMIPS Memory: 125580k/131008k available (1611k kernel code, 5040k reserved, 1244k data, 144k init, 0k highmem, 0k BadRAM) Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) Inode cache hash table entries: 8192 (order: 4, 65536 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU: Intel Celeron (Coppermine) stepping 03 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 564.1262 MHz. ..... host bus clock speed is 66.3676 MHz. cpu: 0, clocks: 663676, slice: 331838 CPU0<T0:663664,T1:331824,D:2,S:331838,C:663676> mtrr: v1.41 (20040107) Richard Gooch ([email protected]) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20040326 ACPI: Interpreter disabled. PCI: PCI BIOS revision 2.10 entry at 0xfd97e, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: ACPI tables contain no PCI IRQ routing entries PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router PIIX/ICH [8086/7110] at 00:07.0 Limiting direct PCI/PCI transfers. isapnp: Scanning for PnP cards... isapnp: Card 'CS4235 CODEC' isapnp: 1 Plug & Play card detected total Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) Software Suspend Gzip Compression Driver v1.0 Software Suspend LZF Compression Driver v1.0 Software Suspend Swap Writer v1.0 Starting kswapd kinoded started VFS: Disk quotas vdquot_6.5.1 devfs: v1.12c (20020818) Richard Gooch ([email protected]) devfs: boot_options: 0x1 vesafb: framebuffer at 0xf5000000, mapped to 0xc8800000, size 1875k vesafb: mode is 800x600x16, linelength=1600, pages=3 vesafb: protected mode interface info at c000:47e0 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Looking for splash picture.... silenjpeg size 24139 bytes, found (800x600, 24091 bytes, v3). Got silent jpeg. Got silent jpeg. Console: switching to colour frame buffer device 92x32 fb0: VESA VGA frame buffer device pty: 1024 Unix98 ptys configured Serial driver version 5.1-alpha (2004-01-01) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1040-0x1047, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1048-0x104f, BIOS settings: hdc:DMA, hdd:pio hda: FUJITSU MPE3084AE, ATA DISK drive blk: queue c0448b60, I/O limit 4095Mb (mask 0xffffffff) hdc: ATAPI 44X CDROM, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: 16514064 sectors (8455 MB) w/512KiB Cache, CHS=1027/255/63, UDMA(33) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 > ide: late registration of driver. md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 16384) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. SoftwareSuspend2: Swapwriter: Image location doesn't begin with 'swap:'<1>Swsusp 2.0-rc4: Missing or invalid storage location (resume2= parameter). Please correct and rerun lilo (or equivalent) before suspending. Swsusp 2.0-rc4: kswsuspd starting RAMDISK: Compressed image found at block 0 Freeing initrd memory: 138k freed VFS: Mounted root (ext2 filesystem). Mounted devfs on /dev Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Mounted devfs on /dev Freeing unused kernel memory: 144k freed Got silent jpeg. Real Time Clock Driver v1.10f usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 15:03:24 Apr 20 2004 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 9 for device 00:07.2 PCI: Sharing IRQ 9 with 00:06.0 usb-uhci.c: USB UHCI at I/O 0x1020, IRQ 9 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usbdevfs: remount parameter error EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal Adding Swap: 506008k swap-space (priority -1) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal EXT3-fs: mounted filesystem with ordered data mode. eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others PCI: Found IRQ 9 for device 00:06.0 PCI: Sharing IRQ 9 with 00:07.2 eth0: Intel Corp. 82557/8/9 [Ethernet Pro 100], 00:D0:B7:87:81:5B, IRQ 9. Receiver lock-up bug exists -- enabling work-around. Board assembly 690821-000, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x24c9f043). Receiver lock-up workaround activated. inserting floppy driver for 2.4.26-1mdk Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 hdc: attached ide-cdrom driver. hdc: ATAPI 40X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Installing knfsd (copyright (C) 1996 [email protected]). parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP] lp0: using parport0 (polling). Looking for splash picture.... found (800x600, 5062 bytes, v3). Splash status on console 0 changed to on SCSI subsystem driver Revision: 1.00 specify port CS4236+ soundcard not found or device busy





Surlignage Carl Pelletier <[email protected]>:



Est-ce que tu peux nous donner un output de la commande :

lspci -vvv | grep audio

(ouvre une console, logue toi root et execute la commande)

Merci



On Fri, Sep 03, 2004 at 07:49:27AM -0400, Pierre Chaussé wrote:


Bonjour,

J'ai installé un premier système linux dans l'école de ma fille pour que
les enseignants soient en mesure de constanter les avantages d'un tel
système.  J'ai choisi la distribution Edulinux 2004. Tout fonctionne
très bien sauf qu'il n'y a pas de son.
C'est un ordinateurs CIARA (celeron 500 Mhz) avec carte de son (intégrée
à la carte mère)  Crystal Audio. La carte n'est pas détectée. Je ne vois
aucune carte de son dans la liste de matériel du centre de controle
mandrake.
Je dois régler ce problème si je veux que les enseignants embarquent.

Je cherche donc une façon manuelle de faire en sorte que la carte de son
soit détectée.

merci

--
------------------------------------------------------------------------
*Pierre Chaussé*
*Scolarité de doctorat(Université de Yale)
Économiste et chargé de cours à l'UQÀM aux HÉC et à l'U. de M. *

*Courriel:* [email protected] <>

[email protected] <>

[email protected] <>


--
Liste de diffusion aide
http://linux-quebec.org/mailman/listinfo/aide


--
-- Carl Pelletier
-- PGP KEY ID=2783C6E9
-- [email protected]

---------------
<< Si on met au point un système que tout imbécile peut utiliser, seuls


les


imbéciles voudront l'utiliser >>







-------------------------------------------------
Uqam Service IMP: http://www.er.uqam.ca/courrier






------------------------------------------------------------------------

--
Liste de diffusion aide
http://linux-quebec.org/mailman/listinfo/aide




--
------------------------------------------------------------------------
*Pierre Chaussé*
*Scolarité de doctorat(Université de Yale)
Économiste et chargé de cours à l'UQÀM aux HÉC et à l'U. de M. *

*Courriel:* [email protected] <>

[email protected] <>

[email protected] <>